#include "wifi_board.h"
#include "audio_codecs/es8311_audio_codec.h"
#include "application.h"
#include "display/lcd_display.h"
// #include "display/no_display.h"
#include "button.h"
#include "config.h"
#include "iot/thing_manager.h"
#include "led/single_led.h"

#include "esp_lcd_panel_ops.h"
#include "esp_lcd_mipi_dsi.h"
#include "esp_ldo_regulator.h"

#include "esp_lcd_mipi_dsi.h"
#include "esp_lcd_jd9165.h"
#include "esp_lcd_touch_gt911.h"

#include <wifi_station.h>
#include <esp_log.h>
#include <driver/i2c_master.h>

#define TAG "jc1060p470"

LV_FONT_DECLARE(font_puhui_20_4);
LV_FONT_DECLARE(font_awesome_20_4);

static const jd9165_lcd_init_cmd_t lcd_cmd[] = {

    {0x30, (uint8_t[]){0x00}, 1, 0},
    {0xF7, (uint8_t[]){0x49,0x61,0x02,0x00}, 4, 0},
    {0x30, (uint8_t[]){0x01}, 1, 0},
    {0x04, (uint8_t[]){0x0C}, 1, 0},
    {0x05, (uint8_t[]){0x00}, 1, 0},
    {0x06, (uint8_t[]){0x00}, 1, 0},
    {0x0B, (uint8_t[]){0x11}, 1, 0},
    {0x17, (uint8_t[]){0x00}, 1, 0},
    {0x20, (uint8_t[]){0x04}, 1, 0},
    {0x1F, (uint8_t[]){0x05}, 1, 0},
    {0x23, (uint8_t[]){0x00}, 1, 0},
    {0x25, (uint8_t[]){0x19}, 1, 0},
    {0x28, (uint8_t[]){0x18}, 1, 0},
    {0x29, (uint8_t[]){0x04}, 1, 0},
    {0x2A, (uint8_t[]){0x01}, 1, 0},
    {0x2B, (uint8_t[]){0x04}, 1, 0},
    {0x2C, (uint8_t[]){0x01}, 1, 0},
    {0x30, (uint8_t[]){0x02}, 1, 0},
    {0x01, (uint8_t[]){0x22}, 1, 0},
    {0x03, (uint8_t[]){0x12}, 1, 0},
    {0x04, (uint8_t[]){0x00}, 1, 0},
    {0x05, (uint8_t[]){0x64}, 1, 0},
    {0x0A, (uint8_t[]){0x08}, 1, 0},
    {0x0B, (uint8_t[]){0x0A,0x1A,0x0B,0x0D,0x0D,0x11,0x10,0x06,0x08,0x1F,0x1D}, 11, 0},
    {0x0C, (uint8_t[]){0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D}, 11, 0},
    {0x0D, (uint8_t[]){0x16,0x1B,0x0B,0x0D,0x0D,0x11,0x10,0x07,0x09,0x1E,0x1C}, 11, 0},
    {0x0E, (uint8_t[]){0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D}, 11, 0},
    {0x0F, (uint8_t[]){0x16,0x1B,0x0D,0x0B,0x0D,0x11,0x10,0x1C,0x1E,0x09,0x07}, 11, 0},
    {0x10, (uint8_t[]){0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D}, 11, 0},
    {0x11, (uint8_t[]){0x0A,0x1A,0x0D,0x0B,0x0D,0x11,0x10,0x1D,0x1F,0x08,0x06}, 11, 0},
    {0x12, (uint8_t[]){0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D,0x0D}, 11, 0},
    {0x14, (uint8_t[]){0x00,0x00,0x11,0x11}, 4, 0},
    {0x18, (uint8_t[]){0x99}, 1, 0},
    {0x30, (uint8_t[]){0x06}, 1, 0},
    {0x12, (uint8_t[]){0x36,0x2C,0x2E,0x3C,0x38,0x35,0x35,0x32,0x2E,0x1D,0x2B,0x21,0x16,0x29}, 14, 0},
    {0x13, (uint8_t[]){0x36,0x2C,0x2E,0x3C,0x38,0x35,0x35,0x32,0x2E,0x1D,0x2B,0x21,0x16,0x29}, 14, 0},
    
    // {0x30, (uint8_t[]){0x08}, 1, 0},
    // {0x05, (uint8_t[]){0x01}, 1, 0},
    // {0x0C, (uint8_t[]){0x1A}, 1, 0},
    // {0x0D, (uint8_t[]){0x0E}, 1, 0},

    // {0x30, (uint8_t[]){0x07}, 1, 0},
    // {0x01, (uint8_t[]){0x04}, 1, 0},

    {0x30, (uint8_t[]){0x0A}, 1, 0},
    {0x02, (uint8_t[]){0x4F}, 1, 0},
    {0x0B, (uint8_t[]){0x40}, 1, 0},
    {0x12, (uint8_t[]){0x3E}, 1, 0},
    {0x13, (uint8_t[]){0x78}, 1, 0},
    {0x30, (uint8_t[]){0x0D}, 1, 0},
    {0x0D, (uint8_t[]){0x04}, 1, 0},
    {0x10, (uint8_t[]){0x0C}, 1, 0},
    {0x11, (uint8_t[]){0x0C}, 1, 0},
    {0x12, (uint8_t[]){0x0C}, 1, 0},
    {0x13, (uint8_t[]){0x0C}, 1, 0},
    {0x30, (uint8_t[]){0x00}, 1, 0},

    // {0X3A, (uint8_t[]){0x55}, 1, 0},
    {0x11, (uint8_t[]){0x00}, 1, 120},
    {0x29, (uint8_t[]){0x00}, 1, 20},
};

class jc1060p470 : public WifiBoard {
private:
    i2c_master_bus_handle_t codec_i2c_bus_;
    Button boot_button_;
    LcdDisplay *display__;

    void InitializeCodecI2c() {
        // Initialize I2C peripheral
        i2c_master_bus_config_t i2c_bus_cfg = {
            .i2c_port = I2C_NUM_1,
            .sda_io_num = AUDIO_CODEC_I2C_SDA_PIN,
            .scl_io_num = AUDIO_CODEC_I2C_SCL_PIN,
            .clk_source = I2C_CLK_SRC_DEFAULT,
            .glitch_ignore_cnt = 7,
            .intr_priority = 0,
            .trans_queue_depth = 0,
            .flags = {
                .enable_internal_pullup = 1,
            },
        };
        ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &codec_i2c_bus_));
    }

    void InitializeGT911()
    {
        ESP_LOGI(TAG,"Initialize Gsl3680");
        static esp_lcd_touch_handle_t ret_touch;
        const esp_lcd_touch_config_t tp_cfg = {
            .x_max = LCD_H_RES,
            .y_max = LCD_V_RES,
            .rst_gpio_num = LCD_TOUCH_RST, // Shared with LCD reset
            .int_gpio_num = LCD_TOUCH_INT,
            .levels = {
                .reset = 0,
                .interrupt = 0,
            },
            .flags = {
                .swap_xy = 0,
    #if CONFIG_BSP_LCD_TYPE_1024_600
                .mirror_x = 1,
                .mirror_y = 1,
    #else
                .mirror_x = 0,
                .mirror_y = 1,
    #endif
            },
        };
        esp_lcd_panel_io_handle_t tp_io_handle = NULL;
        esp_lcd_panel_io_i2c_config_t tp_io_config = ESP_LCD_TOUCH_IO_I2C_GT911_CONFIG();
        tp_io_config.scl_speed_hz = 100000;
        esp_lcd_new_panel_io_i2c(codec_i2c_bus_, &tp_io_config, &tp_io_handle);
        esp_lcd_touch_new_i2c_gt911(tp_io_handle, &tp_cfg, &ret_touch);
        return;
    }

static esp_err_t bsp_enable_dsi_phy_power(void)
{
    #if MIPI_DSI_PHY_PWR_LDO_CHAN > 0
        // Turn on the power for MIPI DSI PHY, so it can go from "No Power" state to "Shutdown" state
        static esp_ldo_channel_handle_t phy_pwr_chan = NULL;
        esp_ldo_channel_config_t ldo_cfg = {
            .chan_id = MIPI_DSI_PHY_PWR_LDO_CHAN,
            .voltage_mv = MIPI_DSI_PHY_PWR_LDO_VOLTAGE_MV,
        };
        esp_ldo_acquire_channel(&ldo_cfg, &phy_pwr_chan);
        ESP_LOGI(TAG, "MIPI DSI PHY Powered on");
    #endif // BSP_MIPI_DSI_PHY_PWR_LDO_CHAN > 0

        return ESP_OK;
}

    void InitializeLCD()
    {
        bsp_enable_dsi_phy_power();
        esp_lcd_panel_io_handle_t io = NULL;
        esp_lcd_panel_handle_t disp_panel = NULL;

        esp_lcd_dsi_bus_handle_t mipi_dsi_bus = NULL;
        esp_lcd_dsi_bus_config_t bus_config = {
            .bus_id = 0,
            .num_data_lanes = LCD_MIPI_DSI_LANE_NUM,
            .phy_clk_src = MIPI_DSI_PHY_CLK_SRC_DEFAULT,
            .lane_bit_rate_mbps = 900,
        };
        esp_lcd_new_dsi_bus(&bus_config, &mipi_dsi_bus);

        ESP_LOGI(TAG, "Install MIPI DSI LCD control panel");
        // we use DBI interface to send LCD commands and parameters
        esp_lcd_dbi_io_config_t dbi_config = {
            .virtual_channel = 0,
            .lcd_cmd_bits = 8,   // according to the LCD spec
            .lcd_param_bits = 8, // according to the LCD spec
        };
        esp_lcd_new_panel_io_dbi(mipi_dsi_bus, &dbi_config, &io);

        // esp_lcd_dpi_panel_config_t dpi_config = JD9165_1024_600_PANEL_60HZ_DPI_CONFIG(LCD_COLOR_PIXEL_FORMAT_RGB565);

        esp_lcd_dpi_panel_config_t dpi_config = {
            .virtual_channel = 0,     
            .dpi_clk_src = MIPI_DSI_DPI_CLK_SRC_DEFAULT,     
            .dpi_clock_freq_mhz = 52,                                               
            .pixel_format = LCD_COLOR_PIXEL_FORMAT_RGB565,                       
            .num_fbs = 1,                                    
            .video_timing = {                                
                .h_size = 1024,                              
                .v_size = 600,   
                .hsync_pulse_width = 24,                            
                .hsync_back_porch = 160,                              
                .hsync_front_porch = 160,                    
                .vsync_pulse_width = 10,
                .vsync_back_porch = 21,                                            
                .vsync_front_porch = 12,                     
            },                                               
            .flags = {
                .use_dma2d = true,
            },    
        };

        jd9165_vendor_config_t vendor_config = {
            .init_cmds = lcd_cmd,
            .init_cmds_size = sizeof(lcd_cmd) /sizeof(jd9165_lcd_init_cmd_t),
            .mipi_config = {
                .dsi_bus = mipi_dsi_bus,
                .dpi_config = &dpi_config,
            },
        };

        const esp_lcd_panel_dev_config_t lcd_dev_config = {
            .reset_gpio_num = PIN_NUM_LCD_RST,
            .rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB,
            .bits_per_pixel = 16,
            .vendor_config = &vendor_config,
        };
        esp_lcd_new_panel_jd9165(io, &lcd_dev_config, &disp_panel);
        esp_lcd_panel_reset(disp_panel);
        esp_lcd_panel_init(disp_panel);

        display__ = new MipiLcdDisplay(io,disp_panel,LCD_H_RES,LCD_V_RES,
                 DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY,
                 {
                    .text_font = &font_puhui_20_4,
                    .icon_font = &font_awesome_20_4,
                    .emoji_font = font_emoji_64_init(),
                });
        return;
    }

    void InitializeButtons() {
        boot_button_.OnClick([this]() {
            auto& app = Application::GetInstance();
            if (app.GetDeviceState() == kDeviceStateStarting && !WifiStation::GetInstance().IsConnected()) {
                ResetWifiConfiguration();
            }
        });
        boot_button_.OnPressDown([this]() {
            Application::GetInstance().StartListening();
        });
        boot_button_.OnPressUp([this]() {
            Application::GetInstance().StopListening();
        });
    }

    // 物联网初始化，添加对 AI 可见设备
    void InitializeIot() {
        auto& thing_manager = iot::ThingManager::GetInstance();
        thing_manager.AddThing(iot::CreateThing("Speaker"));
    }

public:
    jc1060p470() : boot_button_(BOOT_BUTTON_GPIO) {  

        InitializeCodecI2c();
        InitializeIot();
        InitializeLCD();
        InitializeButtons();
        GetBacklight()->RestoreBrightness();
    }

    virtual Led* GetLed() override {
        static SingleLed led(BUILTIN_LED_GPIO);
        return &led;
    }

    virtual AudioCodec* GetAudioCodec() override {
        static Es8311AudioCodec audio_codec(codec_i2c_bus_, I2C_NUM_1, AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE,
            AUDIO_I2S_GPIO_MCLK, AUDIO_I2S_GPIO_BCLK, AUDIO_I2S_GPIO_WS, AUDIO_I2S_GPIO_DOUT, AUDIO_I2S_GPIO_DIN,
            AUDIO_CODEC_PA_PIN, AUDIO_CODEC_ES8311_ADDR);
        return &audio_codec;
    }
    
    virtual Display* GetDisplay() override {
        
        return display__;
    }

    virtual Backlight* GetBacklight() override {
        static PwmBacklight backlight(PIN_NUM_BK_LIGHT, DISPLAY_BACKLIGHT_OUTPUT_INVERT);
        return &backlight;
    }

};

DECLARE_BOARD(jc1060p470);